Robotic car, 2018 

Electronic-Mechanic, regular, first year, project-based learning 

Today the concept of robots is seen as a way to reduce human effort and increase productivity without compromising on quality and accuracy of the work. This project considers the implementation of a robot, which can be operated wirelessly using Bluetooth technology. Integrating hardware and software is the key for this project. By integrating hardware and software, the students found just how much technology can be used to develop an outstanding project. The group went a step further by creating an even safer version of the mower. In addition, the autonomous version is also much more convenient for the user. The project includes a heavy amount of circuitry, programming, and integration of the two. The project was done in two different stages. The first stage the group completed was the android application for the wireless control of the lawn mower. The second stage of their project was creating an Autonomous Lawn Mower. This report describes different aspects (technical and non-technical) of the lawnmower.  

Smart dustbin, 2019

Electronic-Mechanic, regular, first year, project based learning

Dustbins (or Garbage bins, Trash cans, whatever the term used) are small plastic (or metal) containers that are used to store trash (or waste) on a temporary basis. They are often used in homes, offices, streets, parks, etc. to collect waste. In some places, littering is a serious offense and hence public waste containers are the only way to dispose of small waste. Usually, it is a common practice to use separate bins for collecting wet or dry, recyclable or non-recyclable waste. In this project, we have designed a simple system called Smart Dustbin using Arduino, Ultrasonic Sensor and Servo Motor, where the lid of the dustbin will automatically open itself upon detection of human hand.

Concept behind Smart Dustbin using Arduino: The main concept behind the Smart Dustbin using Arduino project is Object Detection. We have already used Ultrasonic Sensor in Object Avoiding Robot, where upon detecting an object, the Robot will change its course of direction.

Teachers: Manikandan, Mohammed

Die Table, 2018
Image
Die Table

Fitter regular and dual students have done “Die Table” as a project. We have designed a new steel base table with a 25-30 cm larger glass table top named “Die Table”.

Die Table” has six sides, which are equal in dimension. Each and every side can be used as top or bottom. It is compatible and portable. It is made with accurate angle cutting, fine welding and with perfect finishing. A two-dimensional MS tube with 11 and 15 inch is used for making it. The various applications of this table can be used in living room, reception hall and office.

The trainees are trained in such a way that they have very good skills in designing, perfect sawing, accurate welding, grinding and fine finishing.

Teachers/Instructor: Kesavan, Sivanesan, K. Ravi

Solar charging lamp, 10/2015
Image
Solar Lamp

The solar lamp is made by the students and teachers of Fitter, Electronic Mechanic and Electrician courses. The lamp has a small solar panel, a charging module, batteries and a bulb. Such a lamp can be used either as a reading lamp in a house or in a garden.

The students of Fitter under the guidance of our teacher Kesavan made the metal part of the project.The students of Electronic Mechanic under the guidance of our teacher S. Manikandan made the charging part and the students of Electrician under the guidance of our teacher Shiva Kumar did the electrical part of the project.

Technical data of the project: 3W Solar panel, 6V battery, 3V LED.The stand and the bottom are made by using aluminium rod, solar panel, charging board, Led, connecting wires, batteries and shade. In this project the Fitter trainees learned to use lathe and milling machine whereas the trainees of Electronic Mechanic course learned to make a charging panel and about the concept of using solar energy for lighting. All trainees learn the process of making a solar lamp from design to finish product. Costs of the project: Rs. 1200. This project won 2nd prize at the exhibition organized by the Government of Pondicherry in 2018.

PC Hardware & Network Trainer Kit, March 2014
Image
trainer kit

For the affiliation to NCVT course in Hardware & Networking 6 Hardware and Networking trainer kits are prescribed by NCVT for PC Hardware testing, Network testing and DC voltage checking and to identify the error component. In the market each of such kit cost approx. Rs.1 lakh.

AIAT teachers S. Manikandan (Electronic Mechanic), Ravi Shankar (Hardware & Networking) and Mahendrian (Fitter & Welder) found it to expensive and made a proposal to make such a trainer kit in the institute as a part of the project-based learning. In a team they designed the kit as per specification and made it a teamwork together with the students of Electronic Mechanic, Hardware and Fitter & Welder. Technical specification: Size: 6 x 4 Ft. Costs of the project: Rs 6000 in addition to an old computer.

This project was shown at the exhibition organized by the Government of Pondicherry in 2018.

Tool Box, March-2019
Image
Toolbox

For our students of Fitter and Welder trades AIAT is in need of 60 toolboxes. The students of Fitter and Welder trades should receive a set of tools in a toolbox for their project work at the institute. For that a toolbox project was initiated. The toolboxes of the size 50x20x22 are made of galvanized sheets. The students of 2nd year regular and Dual Fitter course are making it in a serial production. The welder instructor Ravi K guides them and had made various prototypes before going for final production in a larger scale. On this project trainees are learning skills on sheet metal. This part of training is beyond the syllabus for Fitter course. Grace Infrastructure funds this project. The material cost of such a box is approx. Rs.550/box.

Teacher/Instructor: Kesavan, K. Ravi

Lingam, 2018
Image
Shivlingam

 

Generally Shiva Lingam is a symbol of Lord Shiva (symbol of energy, and infinity).

It is a project of Fitter 2nd year class of batch 2017-2018. It is made of Aluminium or Steel rod. The 2nd year students made it as part of training in turning. 

Dimension: 70 mm height x 40 mm diameter.

Instructor: Kesavan

Dining table with glass top and four chairs, 2018
Image
Dining table

 

 

This project is an up cycling project. It is made of MS-pipe waste. In 2018 students of the welding course made this table and 4 chairs by using ½ inch diameter pipe scrap of 6 inches length. The glass plate, wood and leg bushes were bought. It is a project of welding faculty. Students of welding course under TNSDC were practicing welding, grinding and painting skills in this course. 

Instructor: K. Ravi.

Smart Dustbin Project: made in the electronic mechanical class of the Institute of Applied Technology, Irumbai/Tamil Nadu, South India. (Video Tamil Version)

Video file